Nero wont burn

[BloodXero]

ok my stupid nero writing thing is not burning ANY cd's ... here's the output in the log. i need to burn this cd but its being really stupid. should i try reinstalling nero, changing something, or what should i do.

log:

Bailey Curzadd

*************************

Windows 2000 5.0
WinAspi: -
ahead WinASPI: File 'C:\Program Files\ahead\Nero\Wnaspi32.dll': Ver=2.0.1.44, size=172099 bytes, created 2/10/2002 7:08:31 AM
Nero Version: 5.5.8.1
Recorder: <MSI CD-RW MS-8348> Version: 120D - HA 0 TA 0 - 5.5.8.1
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI
CD-ROM: <MSI CD-RW MS-8348> Version: 120D - HA 0 TA 0 - 5.5.8.1
Adapter driver: <atapi> HA 0
Bus Type : default (0) -> ATAPI

=== Scsi-Device-Map ===
CdRomPeripheral : MSI CD-RW MS-8348 atapi Port 0 ID 0 DMA: Off
DiskPeripheral : WDC WD600BB-00CAA1 atapi Port 1 ID 0 DMA: On
=======================

AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 31457280 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 223MB (228708kB)
Free physical memory: 43MB (44752kB)
Memory in use : 80 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Wizard: On

CD-ROM (ISO)
9.5.2001

8:51:01 AM #1 Text 0 File Isodoc.cpp, Line 5095
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9600
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE

8:51:01 AM #2 Phase 88 File dlgbrnst.cpp, Line 1449
ExacLink activated

8:51:01 AM #3 Text 0 File Reader.cpp, Line 118
Reader running

8:51:01 AM #4 Text 0 File Writer.cpp, Line 129
Writer MSI CD-RW MS-8348 running

8:51:01 AM #5 Text 0 File Burncd.cpp, Line 2636
Turn on Track-At-Once, using CD-R/RW media

8:51:01 AM #6 ISO9660GEN -11 File geniso.cpp, Line 4428
First writeable address = 0 (0x00000000)

8:51:02 AM #7 Text 0 File ThreadedTransferInterface.cpp, Line 684
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 348064 (348064) = #348064/77:20.64
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------

8:51:03 AM #8 Text 0 File DlgWaitCD.cpp, Line 199
Last possible write address on media: 359845 (79:59.70)
Last address to be written: 348063 (77:22.63)

8:51:04 AM #9 Text 0 File DlgWaitCD.cpp, Line 1387
Recorder: MSI CD-RW MS-8348;
CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: D0 00 10, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 47 (LO 79:59.71)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)

8:51:07 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 834
Prepare recorder MSI CD-RW MS-8348 for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Close Session
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 713142272

8:51:07 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 862
Removed 2 run-out blocks from end of track 1.

8:51:07 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 684
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 348064 (348064) = #348064/77:20.64
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 348062 blocks [MSI CD-RW MS-8348 ]
--------------------------------------------------------------

8:51:07 AM #13 Phase 24 File dlgbrnst.cpp, Line 1449
Caching of files started

8:51:41 AM #14 Phase 25 File dlgbrnst.cpp, Line 1449
Caching of files completed

8:51:41 AM #15 Phase 36 File dlgbrnst.cpp, Line 1449
Burn process started at 48x (7,200 KB/s)

8:51:41 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1960
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0

8:51:41 AM #17 Text 0 File Mmc.cpp, Line 15644
Set BUFE: ExacLink -> ON

8:55:23 AM #18 SCSI -1093 File Cdrdrv.cpp, Line 1398
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x05040000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x02 0xC9 0x00 0x00 0x1F 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x02 0x00

8:55:23 AM #19 MMC -1093 File Writer.cpp, Line 330
No seek complete

8:55:23 AM #20 Text 0 File ThreadedTransfer.cpp, Line 222
all writers idle, stopping conversion

8:55:23 AM #21 Text 0 File ThreadedTransfer.cpp, Line 216
conversion idle, stopping reader

8:55:24 AM #22 CDR -201 File WriterStatus.cpp, Line 186
Invalid writestate

8:55:24 AM #23 TRANSFER -18 File WriterStatus.cpp, Line 186
Could not perform EndTrack

8:55:24 AM #24 SCSI -1023 File Cdrdrv.cpp, Line 1194
SCSI Exec, HA 0, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x2C 0x00

8:55:24 AM #25 MMC -1023 File WriterStatus.cpp, Line 225
Command sequence error

8:55:24 AM #26 TRANSFER -19 File WriterStatus.cpp, Line 225
Could not perform Fixation

8:55:24 AM #27 Text 0 File WriterStatus.cpp, Line 234
falling back to disc fixation

8:55:25 AM #28 SCSI -1023 File Cdrdrv.cpp, Line 1194
SCSI Exec, HA 0, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x2C
Sense Qual: 0x00
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x2C 0x00

8:55:25 AM #29 MMC -1023 File WriterStatus.cpp, Line 225
Command sequence error

8:55:25 AM #30 TRANSFER -19 File WriterStatus.cpp, Line 225
Could not perform Fixation

8:55:25 AM #31 Phase 38 File dlgbrnst.cpp, Line 1449
Burn process failed at 48x (7,200 KB/s)

8:55:25 AM #32 Text 0 File Scsicmd.cpp, Line 386
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated


Existing drivers:

[sarah]

Hi BloodXero,

What O/S are you using? I also use Nero, originally it was installed on Win98, worked like a dream. When I upgraded to Win2K it stopped working - I uninstalled and re-installed, didn't work the first time but after a few attempts of uninstall and re-install - it works fine now.

Try it - good Luck!

Sarah

[BloodXero]

ya im on win2k also. il try reinstalling it. its acting like a damn monkey. it always stops on 2% for data cd's and 4% on music cd's. ive tried to burn different files on to see if it was the files but its not. tried converting music from mp3 to wav but that didnt work. i guess reinstalling is next. thx.

[sarah]

Hi,

Forgot to mention one thing, also try windows update for latest driver for Nero - its been a while since I did the upgrade, the driver may need updating.

The link for windows update is:

http://v4.windowsupdate.microsoft.com/en/default.asp

or alternatively, click on start | windows update

Sarah

[BloodXero]

no m fully up to date on windows. ive got a fairly big list of updates in the Add/Remove Programs list and the Service Pack 3. i tried the link and there was nothing needed.

[Roy Sinclair]

I'm on W2K and use Nero to burn (version 5.5.7.1) and haven't ever had any problems with it (USB connected burner).

On XP at home I just use the built in burner software since I haven't needed to burn anything "special".

[BloodXero]

well ive got 5.5.8.1 and im just gonna try reinstalling it a couple of times and try to get some results. if nothing happens il just keep looking around for some stuff on it.

[Roy Sinclair]

Make sure you "uninstall" it at least once before trying a re-install.

[BloodXero]

yes i know. gotta get rid of all of the files before reinstall.

[draconis]

Say, why are you not doing a TEST and BURN. Doing a test probably would save you from making all those coasters. Anyways, why are you using nero? I used Nero, and to me it worked buggy, and when I got a new drive, i installed Roxio EZCDCreator and have had no problems since.

[BloodXero]

im using nero because that is what the drive came with and that is what the drive is supposed to use. and what are you talking about test.

[mouse]

I have Nero, rarely burn CD's, though I'll have a bash tommorrow and look for clues.

Generally burning programs have a test stage and a copy stage, the test stage basically simulates the writing process without the risk of coaster production. It takes a bit longer obviously.

[BloodXero]

anyone know how to do a test in nero?

[Jason]

there is an option to do a test-burn its normally a check box...look in the preferences or its on the page where you select the speed at which it will burn...I think thats where its at...


Jason