Enjoy an ad free experience by logging in. Not a member yet? Register.
Results 1 to 2 of 2
02-19-2014, 02:58 AM #1
- Join Date
- Aug 2010
- Southern Oregon
- Thanked 1 Time in 1 Post
This may be off topic for this discussion: tcp/ip question
I have been from top to bottom with web related dev/programming/server setup and admin:
In the late 2000's I had static ip addresses for the sake of serving 4 domains
from home on home built amd 64 servers running FreeBSD, including nameserver configuration
and postfix mail server set up for the 4 domains.
So, I have a fair idea of networking issues.
The tcp/ip rules are that network addresses in the ranges of
192.168.0.0, 18.104.22.168 and 010.0.0.0 are designated as for private local net
use and are not served from remote locations ( accept for VPN networks).
My question is
What about address ranges from 192.0.0.0 to 22.214.171.124 and
126.96.36.199 to 188.8.131.52?
(my working knowledge is limited to ip4 addressing)
02-21-2014, 03:47 AM #2
- Join Date
- Sep 2002
- Saskatoon, Saskatchewan
- Thanked 2,668 Times in 2,637 Posts
These are all ipv4 addresses, but to answer your question, the private network ranges are defined as follows:
10.0.0.0/8 (what a waste of a class A)
So doing some bit calculation magic, that would give you these ranges:
10.0.0.0 - 10.255.255.255
184.108.40.206 - 220.127.116.11
172.16.0.0 - 172.31.255.255
192.168.0.0 - 192.168.255.255
Anything outside of these ranges are routeable (except you shouldn't work with class D and E address ranges).PHP Code:
header('HTTP/1.1 420 Enhance Your Calm');